services

Servicekatalog A bis Z

Unser vollständiges Leistungsspektrum im Überblick: Hier finden Sie alle Prüfverfahren, Analysen und Dienstleistungen des IFO.

Alle Dienstleistungen durchsuchen

Removal test according to DIN EN ISO 3210 / ASTM B680 / ASTM B137

Laboratory services

AAMA 2603,AAMA 2604,AAMA 2605,GS 94007,TL 8010-0001,TL 8010-0002,DBS 918300,DBS 918340,LH 11007172,DBL 7381,DBL 7382,DBL 7390,DBL 9201,STANAG 4360 / AEP-64,PTL 5580,PTL 7524,TL 212,TL 227,TL 256,TL 260,TL 52451,TL 182,DBL 7391

Resistance tests according to DIN EN ISO 2812

Laboratory services

AAMA 2603,AAMA 2604,AAMA 2605,1E1952,1E2732

Pencil hardness according to DIN EN ISO 15184 / ASTM D3363

Laboratory services

GSB QR,Qualicoat

Buchholz hardness according to DIN EN ISO 2815

Laboratory services

GSB QR,QIB,Qualicoat,M040230-00,M040231-00,DBS 918340,DBL 7381,DBL 7382,MBN 10494-5

Mandrel bending test according to DIN EN ISO 1519 (cylindrical mandrel) and DIN EN ISO 6860 (conical mandrel)

Laboratory services

GS 94007,DBL 7381,DBL 7390,DBL 7391,MBN 10494-5,PTL 5580,TL 211,TL 52451

Pressurised water jet testing in accordance with DIN EN ISO 16925

Laboratory services

GSB QR,Qualicoat,GS 94007,TL 8010-0002,1E1951,DBS 918300,DBS 918340,LH 11007172,STANAG 4360 / AEP-64,1E1952,DBL 7391

Colour measurement according to DIN EN ISO / CIE 11664-4

Laboratory services

Qualanod

Colour drop test according to DIN EN ISO 2143

Laboratory services

GSB QR,Qualicoat,DBL 7381,STANAG 4360 / AEP-64,TL 52451,QIB,MBN 10494-6

Filiform corrosion test according to DIN EN ISO 4623-1 / DIN EN ISO 4623-2 / DIN EN 3665 / QUALICOAT

Photo booth

Laboratory services

GSB QR,Qualicoat,TL 8010-0002,DBS 918300,DBS 918340,LH 11007172,STANAG 4360 / AEP-64,PTL 5580,QIB,MBN 10494-5,TL 211

Gloss measurement according to DIN EN ISO 2813

Laboratory services

GSB QR,QIB,Qualicoat,AAMA 2603,AAMA 2604,AAMA 2605,M040230-00,M040231-00,GS 94007,TL 8010-0001,TL 8010-0002,DBS 918300,DBS 918340,LH 11007172,DBL 7381,DBL 7382,DBL 7384,DBL 7390,DBL 7391,MBN 10494-5,MBN 10494-6,STANAG 4360 / AEP-64,PTL 5536,PTL 5538,PTL 5580,TL 182,TL 211,TL 226,TL 227,TL 256,TL 260,TL 52451

Adhesion test according to DIN EN ISO 2409 (cross-cut) and DIN EN ISO 16276-2 (cross-cut)

Laboratory services

AAMA 611,DBL 7381,PTL 5536,PTL 5538,TL 211,TL 226,TL 52451

Alternating Climate Test (ACT)

Laboratory services

DIN EN ISO 12944-6,GSB QR,QIB,Qualicoat,AAMA 2603,AAMA 2604,AAMA 2605,GS 94007,EVO 132.21,DBS 918300,DBS 918340,LH 11007172,DBL 7384,DBL 7390,DBL 7391,DBL 8451,DBL 9201,MBN 10494-6,STANAG 4360 / AEP-64,PTL 5536,PTL 5538,PTL 5580,PTL 7524,TL 182,TL 211,TL 226,TL 227,TL 256,TL 260,TL 52451

Condensation water climate test in accordance with DIN EN ISO 6270-1 / DIN EN ISO 6270-2

Laboratory services

DIN EN ISO 4042,GSB QR,Qualicoat,LH 11007172,DBL 8451,DBL 9201,MBN 10494-6,PTL 7524,TL 212

Condensation water change climate test with sulphur dioxide (Kesternich) in accordance with DIN EN ISO 22479 / DIN EN ISO 6988 / DIN 50018

Laboratory services

TL 8010-0001,TL 8010-0002,DBL 7381,DBL 7382,DBL 7384,DBL 7390,DBL 7391,MBN 10494-5,STANAG 4360 / AEP-64,PTL 5536

Scratch resistance test according to DIN EN ISO 1518-1

Scratch test according to MBN 10494-5 chapter 5.2.1

Laboratory services

GSB QR,QIB,Qualicoat,AAMA 2603,AAMA 2604,AAMA 2605,DBS 918340,STANAG 4360 / AEP-64

Ball impact according to DIN EN ISO 6272-1 / DIN EN ISO 6272-2 / ASTM D2794

Machu test according to QUALICOAT

Martindale test based on DIN CEN / TS 16611

Laboratory services

GS 90010-1,GS 90010-2,DBL 9441,TL 182,TL 212,TL 217,TL 244

Materialography

Mono impact test according to DIN ISO 4532

Laboratory services

GSB QR,Qualicoat,AAMA 2603,AAMA 2604,AAMA 2605

Mortar test according to DIN EN 12206-1

Porosity test according to DIN EN ISO 29601 / DIN 55670 / DIN EN ISO 8289

Raman spectroscopy

Scanning electron microscopy (SEM) / energy dispersive X-ray microanalysis (EDX)

Rubbing fastness test according to ISO 105-X12

Laboratory services

DIN EN ISO 12944,DIN EN ISO 19598,DIN EN ISO 4042,GSB QR,QIB,Qualicoat,AAMA 611,M040230-00,M040231-00,GS 90010-1,GS 90011,EVO 132.21,DBS 918340,LH 11007172,MBN 10494-6,STANAG 4360 / AEP-64,PTL 7524,TL 182,TL 212,TL 217,TL 226,TL 244,TL 260,TL 52451,DBL 7382,DBL 7390,DBL 7391,DBL 8440,DBL 8451,DBL 9201,DBL 9440,DBL 9441

Salt spray test according to DIN EN ISO 9227 / ASTM B117

Laboratory services

AAMA 2604,AAMA 2605

Sand abrasion test according to ASTM D968

Laboratory services

Qualanod

Apparent conductance measurement according to DIN EN ISO 2931

Laboratory services

GSB QR,QIB,Qualicoat,GS 90010-1,GS 94007,TL 8010-0001,TL 8010-0002,DBS 918340,DBL 7381,DBL 7382,DBL 7390,DBL 7391,TL 212,TL 217,TL 244

Coating thickness measurement according to DIN EN ISO 2178 (magnetic method) / DIN EN ISO 2360 (eddy current method)

Laboratory services

GSB QR,TL 8010-0002,STANAG 4360 / AEP-64

Rapid weathering test (artificial weathering with UV fluorescent lamps) in accordance with DIN EN ISO 16474-3, DIN EN ISO 4892-3, GSB AL 631-7 and GSB ST 663-7

Laboratory services

Qualicoat,GS 94007,DBS 918340,MBN 10494-6,STANAG 4360 / AEP-64,TL 182,TL 211,TL 212

Rapid weathering test (artificial weathering with xenon arc lamps) in accordance with DIN EN ISO 16474-2 and DIN EN ISO 4892-2

Laboratory services

GS 94007,EVO 132.21,LH 11007172,DBL 7381,DBL 7391,MBN 10494-5,PTL 5580,PTL 7524,TL 211,TL 227,TL 256,TL 260,TL 52451

Stone impact test according to DIN EN ISO 20567-1 (multi-impact test)

Laboratory services

QIB,TL 8010-0001,TL 8010-0002,DBS 918300,LH 11007172,DIN EN ISO 12944-6

Stamp tear test according to DIN EN ISO 4624 Method B

Laboratory services

DBL 8451,TL 217,TL 244

Thermal shock according to DIN EN ISO 2819 section 4.12

Laboratory services

M040230-00,M040231-00,TL 8010-0001,TL 8010-0002,DBS 918340,DBL 7381,DBL 7382,MBN 10494-5,STANAG 4360 / AEP-64

Cupping test according to DIN EN ISO 1520

Laboratory services

AAMA 2603,AAMA 2604,AAMA 2605,GS 90011,GS 94007,TL 8010-0001,TL 8010-0002,1E2732,DBL 7382,DBL 7390,DBL 7391,MBN 10494-6,STANAG 4360 / AEP-64,TL 182,TL 227,TL 244,TL 256,TL 260